The AIA Show Brings Some of the Glazing Industry’s Newest Products to Chicago
After three years, the American Institute of Architects (AIA) Conference on Architecture is returning for a live, in-person event, June 23-25 at McCormick Place in Chicago. It will feature several products and highlights from the glass and metal industry. Over the next few pages you’ll find a glimpse at just some of what exhibitors will offer. Companies are listed alphabetically.
If you’re attending the show, be sure to stop by and visit us in booth 2117. You can pick up free copies of USGlass magazine and the Architects’ Guide to Glass and Metal, and also sign up for free subscriptions. We look forward to seeing you there!
C.R. Laurence – Booth 1621
C.R. Laurence (CRL) has introduced the Blumcraft® PA100 panic device for 12 foot doors, a new panic system that has been tested to 500,000 cycles without failure to achieve ANSI/BHMA Grade 1 rating. It has a tubular form that is designed with an ultra-narrow, 11/4-inch diameter and an actuating crossbar that requires six pounds of push force to retract the top latch. It is fabricated using CNC machining and finishing equipment and has more than 20 exterior pull handle designs available for use with 13/16-inch laminated glass.
Also from CRL is the Cielo post windscreen system, which has a 31/4-inch front trim and 41/2-inch post depth, delivering optimal structural performance while producing virtually unobstructed views, according to the company. No horizontal extrusions are required for support, resulting in glass spans of up to five feet. The company says the windscreen system is capable of withstanding windloads of up to 80 PSF and is designed for applications such as rooftop swimming pools, dining areas, lounges and other high-altitude exteriors. The system is available in 6-, 7- and 8-foot standard post heights. End posts, center posts, and 90-degree corner posts are also available.
CRL also offers its Klarity freestanding glass partition system, which it says has ultra-slim posts with a 3 /4-inch face trim, creating virtually unobstructed views. The system offers configurations using any combination of end posts, center posts and corner posts in standard and custom sizes. Klarity posts and glass clamps feature 316 grade stainless steel construction for structural integrity and durability. The partitions are available in 5-, 6- and 7-foot post heights.
Frameless Hardware Company – Booth 1738
Frameless Hardware Company’s (FHC) Aspire thermally broken insulating glass entrance door together with its Vertical Door Stile (VDS) system utilizes polyamide strut thermal barriers between the inside and outside aluminum extrusion members. The door handle hardware connects directly to the glass, producing a heavy glass door appearance. The system features narrow width vertical door stiles that have a unique clamping mechanism and unitizing gaskets for fast installations, durability and longevity. The door
also has stainless-steel corner joinery, and pivot alignment system in both top and bottom door rails for easy installation and alignment, according to the company.
The Steincraft ML100 Magnalink Electromagnetic egress handles are also new from FHC. The UL listed (UL-294) handle operation is magnetically coupled to a header-mounted actuator, creating what the company calls an invisible connection, eliminating the need for electrical current, and the wire loops commonly used to conceal wiring in the door handle. The new handles are available in six architectural finishes and the collection is available
with ADA-compliant keyed cylinder configurations and NFPA 101 compliant height configurations. The handles can accommodate entrances up to 10-feet tall.
Mapes – Booth 2436
MapeSpan panels are insulating spandrel glass panels with 1/4-inch tempered spandrel glass laminated directly to an insulating core, interior substrate and interior skin. The interior of the panel can be factory-finished to complement any design requirement, including kynar, anodized and baked enamel. The unitized aspect also reduces field labor and can eliminate the need for a separate insulated backpan, according to the company.
The MapeSpan composite panel uses tempered glass with ceramic frit on the #2 surface combined with an insulating core and a finished interior. The panels are available in a variety of colors, including custom. The interior side is available in any architectural finish or can be supplied as mill aluminum for concealed interiors.
In addition, the company’s Mapes-R+ rabbet edge panels are designed to easily fit into any standard glazing pocket. According to the company, the panels can increase R-value by up to 500% without modifying the existing frame. Available in any architectural finish, the panels are available up to 6-inches thick.
Petersen Aluminum – Booth 2560
PAC-CLAD Precision Series box rib architectural wall panels from Petersen are available in four profiles, each with a different rib pattern. The panels are offered with clip-fastened or no-clip options, in sizes 13/8-inches deep and 12-inches wide. The profiles can be intermixed to create custom patterns and the company says installation can be horizontal or vertical. Petersen’s Box Rib panels can be used on almost any structure that requires exterior wall cladding such as schools, hospitals, banks, sports facilities, office and industrial buildings, as well as residential buildings.
SAFTI First – Booth 2120
Safti First will feature its patent-pending, panelized SAFTI Wall System (S.W.S.), which the company says was successfully tested and listed by UL.
The U.S.-made, panelized, structurally glazed curtainwall system comes in two versions to satisfy non-rated and fire-rated applications. The S.W.S. Architectural provides easy installation in a curtainwall, while the S.W.S. Architectural F.R. is an ASTM E-119/UL 263 fire-resistive rated version that has been tested and listed by UL up to two hours.
Safti-First says the panelized, non-rated and rated systems can be used alone or together for seamless unbroken, 2-inch profile sightlines.
According to the company, the S.W.S. Architectural F.R. panelized curtainwall is the largest fire-rated glazed areas available listed by UL. Each individual panel for the rated areas measures 130-inches by 80-inches. The sizes are larger in the non-rated areas.
The large, non-rated S.W.S. Architectural or rated S.W.S. Architectural F.R. fire-resistive ASTM E-119 wall panels can be combined up to their maximum engineered size.
Total Security Solutions – Booth 4878
Total Security Solutions (TSS) will highlight its range of ballistic systems. The company offers custom ballistic solutions that provide both safety and aesthetics for bullet-resistant barriers.
The company’s custom-fabricated product line includes windows, doors, walls, counters and accessories, ranging from transaction windows to large, complex bullet-resistant systems.
Simonswerk – Booth 2001
With the TECTUS glass hinge system, Simonswerk has developed what it calls an aesthetic and functional solution for the flush-fitting installation of glass doors. The TECTUS glass hinge system, contactless magnetic closure and matched handle variants result in a complete hardware solution that supports contemporary interior design concepts for doors up to 132 pounds as well as heavy-duty doors up to 176 pounds.
YKK AP – Booth 1907
The YWW 60 XT is the newest addition to YKK AP’s enerGfacade family of products, which the company says is designed to meet the most stringent thermal performance requirements.
The YWW 60 XT has both pre-glazed and field-glazed options with a 2½-inch sightline. It has a dual-finish capability and a large glazing pocket which YKK AP says accommodates 1-inch insulating glass or 15/16-inch insulating laminated glass for projects with stringent acoustical performance. The YWW 60 XT is fully re-glazeable from the interior or exterior, depending on the preferred configuration; and has a minimally offset slab edge cover to closely mimic the look of traditional curtainwall, with room to insulate the area behind the slab edge cover to improve thermal performance.
The system features a U-factor of 0.36 BTU/HR/SF with a center of glass value of 0.29 with standard 1-inch glass and thermal performance that is enhanced by 40-mm polyamide isostruts, along with the company’s patented ThermaBond Plus® pour and debridge system.
Southern Aluminum Finishing – Booth 2373
SAF’s C-4200 Series rainscreen panel is a drained and back-ventilated ACM panel system designed to eliminate the visual appearance of mechanical fasteners from panel edges. Once installed the product features a strip of composite material in a reveal between each panel instead of caulk. SAF says this change creates a more uniform appearance. It is available in a selection of standard colors, including metallic finishes, and an array of factory-applied custom colors.
To view the laid-in version of this article in our digital edition, CLICK HERE.