Fall Protection Remains the Most Frequently Citied OSHA Standard Violation

The Occupational Safety and Health Administration (OSHA) has released the list of frequently cited standard violations in the construction industry for 2019. Fall protection was once again ranked the number one violation, followed by scaffolds and ladders.

There were more than 28,000 citations in the construction industry for the year, with the total cost of penalties reaching more than $90 million.

In the nonresidential building construction industry, the total citations are approximately 1,490 with a cost of about $4.3 million. The penalties here reflect current, rather than initial, amounts. The rankings and number of citations represent the rates displayed on OSHA’s website on December 12.

For the nonresidential building sector, the top citations were for duty to have fall protection; scaffolds; aerial lifts; ladders; fall protection systems criteria and practices; wiring methods, components and equipment for general use; respiratory protection; general safety and health provisions; and training requirements.

Since fall protection is the most cited violation of workplace safety, OSHA standards require that fall protection be provided at elevations of 6 feet or higher for the construction industry and when working over dangerous equipment and machinery, regardless of the fall distance.

Fall protection consists of the following standards according to OSHA:
• Guard every floor hole into which a worker can accidentally walk (using a railing and toe-board or a floor hole cover).
• Provide a guard rail and toe-board around every elevated open-sided platform, floor or runway.
• Regardless of height, if a worker can fall into or onto dangerous machines or equipment (such as a vat of acid or a conveyor belt) employers must provide guardrails and toe-boards to prevent workers from falling and getting injured.
• Other means of fall protection that may be required on certain jobs include safety harness and line, safety nets, stair railings and handrails.

CORRECTION

In “Glass and Glazing Related Codes Undergo Vote at ICC Public Hearings” on page 24 of the December 2019 issue of USGlass magazine, the article should have read, “the proposed code change clearly states that laminated glass with a 30-mil interlayer does not require screens.” USGlass regrets the error.

Investigation of Fatality at Virginia Glass Products Closed

An investigation into the death of an employee at Virginia Glass Products’ Ridgeway, Va., facility in April 2019 has closed with a general duty citation and an $8,271.90 penalty.

Jennifer Rose, Virginia Occupational Safety and Health consultation director at the Virginia Department of Labor and Industry, said the company was asked to make corrections as part of the citation. Rose said the company has made the corrections, including adding engineering parts to the equipment involved in the accident, updating procedures and providing training.

Virginia Glass Products declined to comment.

The Construction Industry’s Top Ten Most Frequent Violations

The top ten most frequently cited standard violations for construction from October 2018 through September 2019:
• Duty to have fall protection (1926.501) with 6,514 citations;
• Scaffolds (1926.451) with 2,965 citations;
• Ladder (1926.1053) with 2,593 citations;
• Training requirements for fall protection (1926.503) with 1,939 citations;
• Eye and face protection (1926.102) with 1,554 citations;
• General safety and health provisions (1926.20) with 968 citations;
• Head protection (1926.100) with 914 citations;
• Specific excavation requirements (1926.651) with 770 citations;
• Ariel lifts (1926.453) with 742 citations; and
• Fall protection systems criteria and practices (1926.502) with 686 citations.

To view the laid-in version of this article in our digital edition, CLICK HERE.